Phoenix miner Is the fastest (possibly the fastest) miner based on the Ethash algorithm (Ethereum, ETC, etc.). The program is suitable for video cards from Nvidia and AMD (including mixed mining rigs). Phoenix has long been the second most popular miner, after the legendary miner Claymore's, whose support ended in 2020. It works under Windows x64 and Linux x64. By the way, about the commission they did it. The software charges only 0,65% of the computing power.
- How To Set Up Phoenix Miner
- How To Use Phoenix Miner
- Phoenix Miner Github
- How To Install Phoenix Miner On Windows 10
- Phoenix Miner Download
- Xmrig Miner
List of mining clients that are supported in the latest version of minerstat for Windows. Bminer 16.4.5 cast-xmr 1.8.0 ccminer-alexis 1.0 ccminer-djm34 1.3.1 ccminer-krnlx 2.0 ccminer-tpruvot 2.3.1 ccminer-x16r 2.0 claymore-eth 15.0 claymore-neoscrypt 1.2 cpuminer-opt 3.14.3 cryptodredge 0.26.0 ethminer 0.19.0-11 ewbf-zhash 0.6 gminer 2.49. PhoenixMiner is one of the most popular Ethash mining clients. It works on Nvidia and AMD rigs and Windows and Linux mining systems. PhoenixMiner is very easy to set up and besides Ethash mining it also supports Ubqhash and Etchash mining. The dev fee for using this miner is 0.65% - every 90 minutes the miner will mine for developers for 35. Step 1: Download the miner Click here to download PhoenixMiner Once the download is complete, extract the contents of the.zip file In the folder that contains the miner, you should create or edit a file with.bat extension.
What algorithms does it support and what is mining
- ETCHash - Ethereum, Ethereum Classic, MOAC, Metaverse, Pirl and others;
- Dual mining with Ethash / ETCHash and Blake2s algorithms - other additional algorithms are not supported;
- ProgPoW - Bitcoin Interest (BCI)
- Ubqhash - Ubiq
PhoenixMiner is one of the most popular Ethash mining clients. It works on Nvidia and AMD rigs and Windows and Linux mining systems. PhoenixMiner is very easy to set up and besides Ethash mining it also supports Ubqhash and Etchash mining. The dev fee for using this miner is 0.65% - every 90 minutes the miner will mine for developers for 35. May 26, 2020 Added support for mining with AMD 4 GB cards after the DAG Epoch 350. Depending on the version of the OS and drivers, you can use AMD 4 GB cards up to the era of 372-373 under Windows and 380 under Linux. A new command line option -dagrestart has been added to circumvent problems with DAG distribution on AMD 4GB cards in some driver versions.
Requirements for mining on Phoenix miner
Suitable for cards from two leading manufacturers AMD и Nvidia.
- AMD - Vega series, 580, 570, 560, 480, 470, 460, 390, 290 and even earlier versions, provided the required amount of video memory on the card.
- Nvidia - 2080 ti, 2080,2070, 2060, 1080 ti, 1080, 1070 ti, 1070, 1060, 1050ti series and older models with sufficient VRAM.
Note that the mining software has proven itself well not only on top models of video cards, but also on already quite old ones. The software is able to squeeze the maximum hash rate out of them, while being as loyal as possible to the equipment itself, without overloading it and trying to avoid serious overheating that can disable the equipment.
The miner also requires Windows x64 (Windows 7, Windows 10, etc.) or Linux x64.
Download and install PhoenixMiner
You can download the latest version of PhoenixMiner 5.6d for Windows and Linux by clicking below:
The software does not require installation. You just need to unpack the downloaded archive to a convenient place on your hard disk and the program will be ready to be configured and launched.
Updates / Releases
How To Set Up Phoenix Miner
Update v5.6d (Latest stable version)
- Fixed issue with displaying GPU temperature on some Nvidia graphics cards.
Update v5.6c
- Lower percentage of rejected / overdue solutions from video cards when mining on Nicehash
- Fixed problem with reading graphics card temperature with some AMD graphics cards / drivers.
- Latest AMD drivers for Windows 21.5.1 are already supported starting from 5.6b
- Other minor fixes and improvements
Update v5.6b
- Added support for displaying the access point (connection) of the video card and the temperature of the video memory for Nvidia video cards. Please note that the temperature of the video memory is displayed only by some video cards (3080, 3090, possibly 2080Ti).
- Parameters
-ttj,-ttmem,-tmaxjи-tmaxmemnow also work with Nvidia cards. - Added support for AMD drivers for Windows 21.4.1.
- Added support for AMD Linux drivers 21.10-1244864-ubuntu-18.04 and 21.10-1247438-ubuntu-20.04 (only use them with Polaris or older cards, or latest RX6x00 video cards, these drivers will not work with Vega, Radeon VII, or Navi maps)
Update v5.6a
- Added new kernels for AMD RX6700 graphics cards. They are faster than regular kernels and produce much fewer legacy solutions (share).
- Increased the maximum supported DAG file to 550 (will work until about January 2023)
- Full support for configuring clock speed, fan speed, voltage and memory timings for AMD RX6900 / 6800/6700 graphics cards
- The specific hash rate is now displayed as kilohash per joule (kH / J). Example: if a video card has a hash rate of 30 Mh / s with a power consumption of 100 W, the specific hash rate is 300 kH / J.
- Added new command line parameters
-ttjи-ttmem, allowing to automatically adjust the fan speed depending on the access point (connection) of the video card and the memory temperature, respectively. - Example:
-ttmem 83will keep the memory temperature of the graphics card at 83 ° C or lower, increasing the fan speed as needed. These options can be combined with -tt or with each other. These options are only supported by AMD graphics cards that report junction and memory temperatures. - New command line parameters -tmaxj and -tmaxmem have been added to reduce the use of the video card when the access point (connection) of the video card or the temperature of the video card memory exceeds the specified threshold values. These options are only supported by AMD graphics cards that report features and memory temperatures
- Added support for AMD drivers for Windows 21.3.2 and 21.3.1.
- Added support for AMD Linux 20.50.x drivers. Use these drivers only if you have Polaris graphics cards or older or newer RX6x000 graphics cards.
- WARNING: Vega, Radeon VII and Navi video cards will not work with these drivers!
- Disable the function zero fan on AMD cards whenever a fixed fan speed is used (e.g.
-tt -40), or when using an automatic fan with minimum fan speed (e.g.-tt 63 -minfan 35). To disable this feature, add the command line parameter -fanstop 1 - If Linux says
-mcdag 1, the miner will not wait for the daggen.sh script to complete before starting to create the DAG file. Instead, it will be for a fixed 7 seconds. This allows you to do all of the following in daggen.sh: disable overclocking on Nvidia graphics cards, sleep for 30-60 seconds to allow time for DAG generation, and then reapply overclocking on Nvidia graphics cards. - Other minor improvements and fixes
- Support
-ttj,-ttmem,-tmaxjи-tmaxmemfor Nvidia 3090 and 3080 video cards is not ready for release yet.
- Support
Update v5.5c
- Added native kernels for AMD RX6800 and RX6900 GPUs. They are faster than
regular kernels, and produce much less legacy stakes. - Updated cores for AMD Polaris, Vega and Navi GPUs that are slightly faster and more consuming
less energy than before when mining ETH. To use these updated kernels you need to use
drivers 20.5.1 or newer under Win10 or 20.10.x or newer under Linux. - Nvidia mining cards (P106, P104, etc.) can now use straps and hardware control options
(power limitation, memory overclocking, maximum temperature, etc.) Under Windows. - Added support for the latest AMD driver for Windows 21.1.1.
- Added a new parameter -mcdag to reset memory overclocking on Nvidia cards during
DAG generation. This may allow you to set higher memory overclocking on your Nvidia cards.
without risking messing up the DAG buffer, which can lead to an excessive amount of incorrect shared
resources. Use -mcdag 1 (default is 0, which means off) to use this
new feature. - The -tt parameter is now only for controlling fan behavior. For example -tt 60 sets
automatic fan speed with a set temperature of 60 ° C; -tt -70 sets the fixed fan speed to 70%; and
-tt 0 disables fan control. All of this can be specified for each GPU. - There is a new parameter -hwm that allows you to control the frequency of the hardware
monitoring, which was also done with -tt in previous versions of PhoenixMiner. - Added support for AMD Linux drivers 20.45-1164792 and 20.45-1188099. Use these drivers,
only if you have an RX6800 or RX6900 GPU. WARNING: Vega and Navi GPUs will not work with these
drivers! - Automatically install -ttli instead of -tmax if later version is not supported
driver. This will cause the GPUs to slow down when they reach the set temperature,
to avoid overheating. - Other minor improvements and fixes
Video review and setup PhoenixMiner
How to set up PhoenixMiner
Setting up the subtleties of mining is carried out by making changes to the bat file. The folder contains an example of settings, by analogy of which you can easily create your own batch file.
Example of PhoenixMiner settings (bat-file)
The miner is launched using the command line in the Linux operating system or a bat file in Windows. Below are examples of bat files for each of the cryptocurrencies that can be mined with the Phoenix miner. Remember to replace YOUR_ADDRESS with your wallet address and RIG_ID with your farm name. The name you can choose yourself is absolutely arbitrary, it should contain only the letters of the English alphabet and the signs “-” and “_”. The wallet must be specified for the cryptocurrency you are mining
Ethereum
PhoenixMiner.exe -pool eu1.ethermine.org:2020 -wal YOUR_ADDRESS -pass x -worker RIG_ID -coin eth
MOAC
PhoenixMiner.exe -pool moac.clona.ru:2026 -wal YOUR_ADDRESS -pass x -worker RIG_ID -coin moac
DubaiCoin
PhoenixMiner.exe -pool dbix.clona.ru:5081 -wal YOUR_ADDRESS -pass x -worker RIG_ID -coin dbix
Metaverse ETP
PhoenixMiner.exe -pool etp.2miners.com:9292 -wal YOUR_ADDRESS -pass x -worker RIG_ID -coin etp
Callisto Network
PhoenixMiner.exe -pool clo.2miners.com:3030 -wal YOUR_ADDRESS -pass x -worker RIG_ID -coin clo
Expanse
PhoenixMiner.exe -pool exp.2miners.com:3030 -wal YOUR_ADDRESS -pass x -worker RIG_ID -coin exp
Ethereum Classic
PhoenixMiner.exe -pool etc.2miners.com:1010 -wal YOUR_ADDRESS -pass x -worker RIG_ID -coin etc
Setting up a batch file for Ethereum
- PhoenixMiner.exe - this key indicates which program will be launched. We leave it as it is
- -pool eu1.ethermine.org - pool server. Change to another pool or leave ethermine
- : 4444 pool port. Indicated after the colon
- -whale Is the address of your digital wallet
- -worker Rig1 Is the name of your farm worker. Used for the convenience of tracking statistics on the pool. You can specify any
- -pass x - password on the pool. Almost never used on pools. X means no password
- -log 0 - is responsible for maintaining the miner's event log. 0 - means not to keep a journal. If you put -log 1, then the log will be kept without showing debug messages on the screen, if -log 2 - write log and display debug messages on screen
- -tt 70 - setting the target temperature of the fan control (special values: 0 - no control on all cards, 1-4-only monitoring on all cards with an interval of 30-120 seconds, negative values - fixed fan speed (in%)
- -tstop 85 - means that the video card will be suspended when the temperature reaches 85 °
- -tstart 70 - means that the card will start again when its temperature drops to 70 °
- -fanmin 30 - the minimum rotation speed of the video card fans. It is recommended to put at least 30 in case MSI Afterburner or other software does not start the equation with fans
- pause - means that if you configure something incorrectly, the miner will not close immediately, but will display an error code
Phoenix miner advanced options
Running a mining program sometimes requires additional settings, for example, you need to turn off one of the cards or set a limit for the operating temperature of the card. Below we have prepared for you a list of the most popular Phoenix miner settings. To apply a setting, add it to the standard startup line above.
ssl:// for mining using SSL, add this parameter before the pool address. If the pool address is fully registered, starting with https: //, then just replace https: // with ssl: //. Note that typically the SSL pool address is different from the non-SSL pool address. Example eth.2miners.com:12020 (Ethereum pool 2Miners for SSL connection).
-gpus allows you to use only the necessary video cards for mining. After -gpus, specify the indices of the video cards that you want to use, while the first video card has an index of 1. For example, if you have a rig of 6 video cards, the indices of the video cards go from 1 to 6. Adding a parameter -gpus 12356 will start mining on all video cards except the fourth. If you have more than 10 video cards, their indices must be separated by commas.
-amd uses only AMD graphics cards for mining.
-nvidia uses only Nvidia video cards for mining.
-eres sets the number of mining epochs for which memory is reserved for creating a DAG file. The default is 2 epochs. for example -eres 3 reserves memory 3 epochs ahead. The larger the parameter, the less often the video card needs to allocate memory. If the memory size of your video card is almost equal to the size of the DAG file, it is recommended to use the minimum values.
-log the parameter regulates the creation of a log file. 0 - a log file is not created, 1 - a log file is created, but messages for debugging are not displayed on the screen, 2 - a log file is created and messages are displayed on the screen. By default, the program uses the parameter -log 1
All the parameters of the video cards can be specified not only for all the video cards of the rig together, but also for each of the video cards separately. To do this, specify the values separated by commas. for example -fanmax 70 sets the maximum fan speed of 70% for all video cards together, and -fanmax 70, 80, 90 sets maximum rotation of 70% for the first video card, 80% for the second, and 90% for the third.
-fanmin minimum rotational speed of video card fans in percent. For example the parameter -fanmin 50 indicates to the miner that the fans should spin at a speed of at least 50% of the maximum possible.
-fanmax maximum rotational speed of video card fans in percent. For example the parameter -fanmax 95 indicates to the miner that the fans should spin at a speed no more than 95% of the maximum possible.
-tt the parameter sets the desired operating temperature for video cards. For example, when -tt 65 the program will try to keep the temperature of the video cards at 65 ° C. -tt 0 disables temperature monitoring of video cards. Please note that this parameter can also be used to set a constant rotation temperature of the fans of video cards, for this, a minus is put in front of the number. For example -tt -75 will force the fans of all video cards to rotate at 65% of the maximum possible. Don't be confused with the team -tt 75 which will keep graphics cards at 75 ° C.
PhoenixMiner allows you to configure the overclocking parameters of the video card in the miner launch line. To set the default values, use the number 0 for each parameter.
-powlim sets the maximum power consumption of the video card (power limit) as a percentage from -75 to 75. For example -powlim 50 Remember that this and other fine tuning parameters can be set for each of the video cards separately, for example -powlim 50 0 60 tells the program that the power limit value for the first video card is 50, for the third one is 60, and for the second video card it should use the default value.
-cclock adjusts the core clock in MHz. For Nvidia graphics cards use relative values like -200, +300, etc. for example -cclock +100
-cvddc sets the voltage supplied to the video card core (core voltage) in mV. For Nvidia graphics cards use relative values like -200, +300, etc. for example -cvddc +200
-mclock adjusts the frequency of the video memory of the video card (memory clock) in MHz. for example -mclock 1400
-mvddc sets the voltage supplied to the memory of the video card (memory voltage) in mV.
How To Use Phoenix Miner
If you simply insert the video card into the connector on the motherboard and start the PC, it will display an image. Of course, you will not be able to fully use the graphics accelerator without installing the driver, the computer can not even be put into sleep mode, but the picture will be.
But if you have assembled a rig for cryptocurrency mining, then installing a driver is vital, otherwise the equipment will freeze.
To achieve high performance in the mining of cryptocurrencies, it is necessary to use the most productive drivers, as well as correctly configure the operating system.
The Reds have more trouble setting up the rig,than miners using Nvidia products. But, AMD graphics cards are cheaper than devices of the same level as their competitors.
Usually the greatest number of problems occurs when installing the AMD driver and then setting it up for mining.
AMD driver for mining
Drivers AMD for mining can be downloaded on the official website of this company. The latest installation packages are available at: https://support.amd.com/en-us/download
Before downloading, you must select the version that matches the installed operating system. In this case, it is also necessary to pay attention to its capacity (mining, available only on 64 bit versions of the system, so you need to select the appropriate driver)
In 2017, a special version of the driver was released AMD Mining dedicated crimsoncan be downloaded at: https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx
It does not require additional configuration andallows you to mine right after installation, which is quite convenient. This driver version is also relevant in 2020, but many miners prefer to install Win10-64Bit-Radeon-Software-Adrenalin-2019-Edition-19.8.2-Aug26, or other versions of the last year of release.
If you are using the latest utilitiesIf you install Claymore’s Miner and Phoenix Miner, then by installing the August drivers of last year, you can get the maximum hashrate without flashing the BIOS of AMD video cards. But if you have Win10-64Bit-Crimson-ReLive-Beta-Blockchain, then modifying timings on the fly will not work (at least in Phoenix Miner). Therefore, it is better to install the recommended driver version. Download link: https://www.amd.com/en/support/kb/release-notes/rn-rad-win-19-8-2.
Important! When using the new AMD XT series graphics cards andNavi must be aware that the drivers for the Adrenalin 2020 Edition are still very raw. For Windows 8, individual drivers are not released, in general, you can use the seven drivers, but there is no particular reason to mess with this OS.
When using AMD equipment, it is recommended to install Windows 7 or 10.
How to install the driver when building a farm?
</p>If you put the driver on a clean operating roomsystem, then just download it and run the installation, then the program will do everything itself. If you have already installed older versions of AMD Radeon drivers for mining, you must completely remove the old drivers.
To do this, it is better to use a standard utility AMDCleanupUtility.exe to clean the system. A simple uninstall through the operating system does not completely delete all the files, so subsequently during mining may fail.
This utility is by default located in the folder withAMD drivers along the path C: ProgramFilesAmdCIMBin64. In addition, it is available for download on the AMD website at https://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx. Alternatively, you can use the Display Driver Uninstaller program (DDU), which can be downloaded at https://github.com/Wagnard/display-drivers-uninstaller.
- After uninstalling, it is necessary to reboot and run the installation file of AMD drivers. In this case, you will need to select the place where the new drivers will be unzipped (by default, this is the folder C: AMD), and then go through the standard installation procedure.
- If you did not uninstall before this driver, thenyou need to select a custom installation, and in the next window select 'Clean Installation'. The set of installed components can not be changed. The most important of all components is the AMD display driver, its installation is mandatory.
But if you're not sure you can handle thistask, it’s better to just uninstall the old driver and install the new version. Upon completion, be sure to patch the driver using the atikmdag-patcher utility. Otherwise, failures may occur when starting the rig.
Depending on the installed driver versionand operating system installation procedure has slight differences. As a rule, after installing the drivers, you must restart the computer, after which the correct installation of the drivers can be checked in the device manager.
To do this, it’s easiest to press the key combination “Win + r'On the keyboard and in the window that opens, enter the command'devmgmt.msc'.
</p>In the device manager window, double-click on 'Video adapters'. The drop-down list will show all the installed video cards in the system. They should not have exclamation points or error information.
The version of the installed driver can be checked by double-clicking on a specific video adapter and selecting the “Driver” tab. Here you can view the development date of the installed driver and its version.
- After installing the latest AMD driversyou need to configure them for mining by turning on the calculation mode. To do this, you can use the AMD Radeon Settings utility, which is built into the driver, which, as a rule, is written to autorun. If for some reason it does not automatically load, you can start it yourself by running the RadeonSettings.exe file in the folder C: Program FilesAMDCNextCNext.
In the window that opens, the main program interfaceAMD Radeon Settings go to the Games menu, where they activate the General Settings tab. In this tab, you can set various parameters for each AMD video card installed in the system. You must find the item 'GP workload', In which select'Calculate'. The program will offer to restart itself to save the changes. For each video card, this procedure must be done separately.
You can enable the calculation mode on AMD video cards and in other ways:
- By using the AMD Compute Switcher program, which can be downloaded on a trusted resource, for example, via the link at https://bitcointalk.org/index.php?topic=2815803.0;
- Having written in the .bat file for mining in programsClaymore’s GPU Dual Miner or Phoenix Miner value is -y 1. This can be done in the working console of these miners by pressing the English letter y. Inoda, you need to repeat the inclusion of the calculation mode after updating Windows, which can itself disable this mode and reduce the hash rate.
- If the calculation mode is not turned on, the hashrate during mining will decrease significantly, especially when mining cryptocurrencies with the Ethash algorithm, the most popular of which is Ethereum (ETH).
New blockchain driver for AMD
All new AMD drivers have the computer computing mode necessary for mining.
Special driver version AMD Radeon for mining was released in August 2017,it significantly increased the performance of AMD drivers in mining. It does not require a special procedure for turning on the computer computing mode, but it may not support the latest AMD cards released in 2018.
The installation procedure for this driver is no different from the usual one. It is necessary to clean the system of old drivers, run the installation file and carry out the installation, following the standard installation procedure.
The main installation errors and their solution
Most often, problems arise when drivers are not installed correctly due to incomplete removal of a previous version of AMD drivers. In case of failures, freezes, instabilityin work, you need to increase the amount of available virtual memory (swap file), as well as re-clean the system from old drivers using the AMDCleanupUtility utility and reinstall the drivers, as well as enable the computer computing mode.
In case of errors related tolack of resources to work with a large number of video cards (code 12 Windows), you must install the latest AMD drivers. If this does not help, then the cause of the problems should be sought in the wrong settings. Motherboard BIOS, as well as the operating system used.
Windows 7 to use 6-7 graphics cards requires the use of a special mod available for download and study at https://bitcointalk.org/index.php?topic=712228.0.
To use a large number of video cardsAMD (up to 12), you must use the latest versions of the Windows 10 operating system, otherwise the rig will either not work at all, or it will work unstably.
Recommendation! Mining farm of 12 AMD cards on windows runIt’s extremely difficult for a beginner. The optimal number of video accelerators in Riga is 6-8. If more is needed, then build another or install Linux or Hive.
Patch for AMD driver
For AMD video cards that have a BIOS flashed, you may need to use a patch for the driver - a program atikmdag-patcher.
</p>The need for this is manifested in the presence of errors with the code 43 in Windows device manager. And also for the –strap option to work in the stamp, and, in general, it is better to use a patcher after each reinstallation of drivers.
The program can be downloaded on the official branch at https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher
You must be careful not to download the virus from third-party resources that offer an allegedly updated version of the patcher. Latest version of this program 1.4.6. Those who offer newer versions spread viruses.
This program must be run once afterdriver installation, it will show at startup whether there are any unpatched drivers in the system and will offer to do this. After that, you need to reboot and enable the calculation mode for video cards.
Nvidia mining driver
Phoenix Miner Github
</p>Install Nvidia drivers for mining moresimpler than AMD drivers. It is usually enough to download the latest drivers from the official site at https://www.nvidia.ru/Download/index.aspx?lang=en and install them, and then fine-tune the system for mining using utilities for overclocking video cards.
When downloading drivers from the Nvidia website, it is better to use the manual search for the required driver by filling out a form indicating the type of video card, series, operating system and language of the installer.
How to install the driver for the GTX version?
To install NVIDIA drivers correctly, you needcompletely remove existing previous versions. To do this, you can uninstall them through the control panel in the section for adding and removing programs where you need to uninstall NVIDIA Windows Display Drivers.
Then you need to run the installation file, select the path for unpacking the drivers (by default C: NVIDIADisplayDriver), and then install them according to the standard procedure.
In this case, it is best to choose a custom installation (Custom or Advanced in English) and activate the option “Performing a clean installation” in the window that appears. This will guarantee the correct installation of NVIDIA software.
Possible errors when installing the driver
Errors can occur during the installation and operation of Nvidia and AMD drivers, for example, video drivers fly in the dual in mining, the system freezes, mining programs generate errors.
If there is no overclocking in the system, then such errors,typically resolved by reinstalling the drivers. Driver failure can occur during power failures, which lead to a violation of the integrity of the files on the media, exposure to viruses and other reasons.
Sometimes it’s worth re-downloading the installation files from the manufacturer’s website, restarting the computer and repeating the installation procedure again as administrator.
In order to avoid problems while installing Nvidia and AMD video cards on the same computer, it is better to install AMD drivers first.
The table of drivers for mining video cards
Different driver versions have separatefeatures related to the presence of errors, the use of graphics adapter memory, performance, tuning features, compatibility with various graphics cards and other parameters. The best driver for mining is usually the one that provides the most stable operation.
Detailed information about a specific driver version can usually be found on the manufacturer’s website.
How To Install Phoenix Miner On Windows 10
Overview of the various drivers used for mining are presented in the following tables:
| Information about the features of mining drivers for AMD company graphics cards | |||||
|---|---|---|---|---|---|
| Driver version | Date of issue | Video Card Compatibility (Series) | The need to enable the computer computing mode GPU Workload | Compatibility for games | Compatible Operating Systems (64 bit) |
| Win10-64Bit-Radeon-Software-Adrenalin-2019-Edition-19.8.2-Aug26 | August 6, 2018 | Navi, XT, Vega, RX 400-500, R9, R7, R5, HD 8500 - HD 8900, HD 7700 - HD 7900 | Is required | there is | Windows 7, Windows 10 |
| Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23 | August 2017 | Vega, RX 400-500, R9, R7, R5, HD 8500 - HD 8900, HD 7700 - HD 7900 | Not required | Not | Windows 7, Windows 10 |
All drivers presented in the table without problemssupport the most popular graphics cards from AMD used for mining: RX 480, RX 570 and RX 580. All AMD drivers from version 17.10.2 support work with 12 video cards.
For drivers from Nvidia, the information is presented in the following table:
| Information on the features of the drivers for mining for Nvidia graphics cards | |||||
|---|---|---|---|---|---|
| Driver version | Date of issue | Video card compatibility | CUDA version support | Compatible operating systems | Features |
| 430.86 | August 2019 | NVIDIA TITAN Series</p> GeForce RTX 20 Series: GeForce 16 Series: GeForce 10 Series: | 10 10.1 | Windows 10 | For Nvidia drivers, overclocking is done by separate utilities. |
| 445.87 | April 2020 | NVIDIA TITAN Series</p> GeForce RTX 20 Series: GeForce 16 Series: GeForce 10 Series: GeForce 900 Series | 10 10.1 10.2 | ||
All the drivers presented in the table support the most popular Nvidia video cards used for mining: GTX1050 Ti, GTX1080 Ti, GTX1070 and GTX 1060 6gb, RTX 2060-2080.
Availability of support for newer versions CUDA PhysX Software in drivers Nvidia improves the algorithm for working with video memory, which increases the overall stability and performance of the system. It is necessary that the program used for mining supports this technology.
Proper selection and installation of drivers forvideo cards during mining will allow you to quickly configure the equipment, get the maximum hashrate during mining, and subsequently do not waste your nerves and time, eliminating constantly occurring malfunctions and freezes. Therefore, it is worth periodically studying profile forums and sites for the presence of newer, optimal drivers.
</p>5
/
5
(
1
Phoenix Miner Download
vote
)